What should a kitchen worktop quote include?

A useful kitchen worktop quote identifies the exact material and finish, thickness, edge treatment, cut-outs, joints, templating, delivery and installation. It also makes clear who supplies the sink and tap, who reconnects services, and which items remain provisional. Compare those details before deciding which total represents the right specification.

Monochrome Viola kitchen with dark cabinetry and a veined island
Monochrome Viola kitchen with dark cabinetry and a veined island. A Sheraton Interiors project.

A surface name and an approximate length leave too much open. This guide helps you check the worktop part of a kitchen proposal in detail; our complete kitchen quote-comparison guide covers cabinetry, appliances and the wider installation scope.

Describe the surface precisely

Ask the supplier to record the manufacturer or stone identification, product or colour reference, finish and thickness. If a showroom sample has persuaded you, make sure the written description refers to that selection. Establish whether the quotation is based on a specific material or an allowance that will be confirmed later.

For a strongly patterned surface, discuss how the selected piece will look across the island, adjoining runs and vertical panels. A small sample is useful for colour and texture, but it cannot show a whole slab’s pattern. Ask what selection or layout approval is available for the product you choose.

Use this specification table when comparing quotes

Item Ask the supplier to confirm
Material Exact reference, finish, thickness and any provisional allowance.
Edges and ends Profile, exposed edges, island overhangs and any waterfall or built-up edge detail.
Cut-outs Sink type, hob, tap holes, sockets and any drainer grooves or additional openings.
Upstands and splashbacks Which pieces are included, their dimensions and any socket cut-outs.
Joints and pattern Proposed joint positions and the process for agreeing the layout of patterned pieces.
Site work Templating, delivery, access, fitting, supports, removal and service reconnection responsibilities.

Discuss the edge and waterfall detail together

An island’s top, overhang and vertical end should be reviewed as one design. Ask how the edge will be formed, where the pieces meet and whether any support is required. Confirm what the quote includes rather than assuming an inspiration photograph describes the construction.

Our Monochrome Viola project shows a patterned island surface continuing down its end, alongside a coordinated splashback. It is a useful reference for discussing visual continuity. Its appearance alone does not identify a material brand or establish which joint and support arrangement would suit your kitchen.

Agree the cut-outs before fabrication

List every opening, including the sink, tap, hob and any worktop power point. Confirm the exact product models and how each item will be fitted. An undermounted sink and a top-mounted sink need different details; a flush-mounted appliance also needs its intended installation checked.

Ask who passes the technical drawings to the fabricator and who checks changes. If you replace a tap or appliance after the design is agreed, do not assume the original cut-out remains suitable. A small change in product selection can alter the detail that has to be fabricated.

Make joints and support a design conversation

Request the proposed joint layout and discuss it alongside access, slab dimensions and the position of openings. The aim is an appropriate installation with an appearance you understand before production. Do not treat “no visible joints” as a promise unless the supplier has specifically agreed a feasible design.

Cosentino’s Dekton design and installation manual treats edges, cut-outs, overhangs and supports as related technical decisions. It also provides guidance for arranging patterned pieces. Requirements are product-specific: your fabricator should use the current instructions for your selected material, rather than transfer dimensions from a different surface.

Check what must be ready for templating

Ask for the fabricator’s site-readiness list and confirm who checks it. For example, the Dekton manual calls for cabinets to be installed, level and in their final positions before detailed measurement. Your own fabricator should confirm the process for the chosen product and site.

Agree which items need to be present or confirmed at the visit, including sink and appliance details. Ask what happens if the room is not ready, if dimensions change afterwards or if a second visit is needed. Confirm the sequence between templating, fabrication and fitting without assuming a universal turnaround time.

Look beyond the fitting line

Clarify whether the price includes delivery, difficult access, lifting arrangements, removal of an existing surface and disposal. Separately identify plumbing and electrical reconnections, sealing, making good and any temporary arrangements while the kitchen is incomplete.

Request the relevant care information and warranty terms before ordering. Keep those with the final specification and invoice. The practical question is who you contact if something needs attention, and which supplier is responsible for which part of the work.

Review the worktop within the whole kitchen

If your kitchen proposal contains a worktop allowance or unclear detail, bring it to a kitchen quote review. We can discuss the specification within an alternative Sheraton design. Explore our contemporary kitchens or classic and Shaker projects to see how surface choices relate to the rest of the room.

Your questions, answered

Why can two quotes for the same worktop material differ?

They may include different thicknesses, edge details, cut-outs, vertical panels, templating or installation work. Check the exact reference and a shared drawing before comparing totals. Site access and the agreed fabrication details may also differ.

Can I choose a worktop from a small sample?

Use a sample to assess colour and finish, then ask how the full pattern will be represented. For a strongly patterned surface, discuss the slab or piece layout and any available approval process before fabrication.

Does a worktop quote include fitting the sink and tap?

Do not assume so. Ask the supplier to distinguish fabrication, sink mounting, tap-hole cutting and plumbing connections, and to name the party responsible for each task.

When should kitchen worktops be templated?

Follow the fabricator’s readiness requirements for the selected product. Confirm cabinet positioning, relevant fittings and the agreed layout before the visit, and ask how any later changes would affect the quotation or programme.

Scroll to Top

Thank you for requesting our brochure

Your kitchen inspiration is ready. Download the Sheraton Interiors brochure below.

Download your kitchen brochure

Ready to discuss your plans? Request a free design consultation.

020 8894 5650
info@sheratoninteriors.co.uk

Request your free 2026 brochure